Data monitor
- Data monitor list
- Turn the ignition switch to OFF.
- Connect the SSM4 to the DLC3.
- Turn the ignition to IG ON and select [Data monitor] on the SSM4 display screen to check the data monitor.
PARTS DESCRIPTION
| Item name | Description/display range | Normal value | Remarks |
|---|---|---|---|
| [Vehicle Speed] | Indicates the vehicle speed input from the skid control computer. Display range: 0.0 to 300.0km/h |
0km/h: When stopped | - |
| No substantial fluctuations present: When cruising | - | ||
| [Engine Speed] | Indicates the engine speed. Display range: 0 to 12800rpm |
No substantial fluctuations present: Engine speed is constant | - |
| [Motor Current] | Indicates the current flowing to the motor. Display range: -327.68 to 327.67A |
Changes in proportion to the steering force: During engine start, steering operation | Left turn (+) Right turn (-) |
| [Command Value Current] | Indicates the requirement for the current flowing to the motor. Display range: -327.68 to 327.67A |
Changes in proportion to the steering force: During engine start, steering operation | Left turn (+) Right turn (-) |
| [Steering Angle Velocity] | Indicates the angular speed of steering operation. Display range: -32768 to 32767deg/s |
Changes in proportion to the steering speed: During engine start, steering operation | Left turn (+) Right turn (-) |
| [Thermistor Temperature] | Indicates the ECM board temperature. Display range: -50.0 to 150.0°C |
- | - |
| [PIG-Power Source Volt] | Indicates the power supply voltage to drive the motor. Display range: 0.0000 to 20.1531V |
9 to 16V: Always | - |
| [Ignition Power Supply Voltage] | Indicates the ECM power supply state. Display range: 0.0000 to 20.1531V |
9 to 16V: IG ON | - |
| [Steering Wheel Torque] | Indicates the steering torque. Display range: -7.00 to 7.00Nm |
Changes in proportion to the steering force: During engine start, steering operation | Left turn (+) Right turn (-) |
| [Motor Rotation Angle] | Indicates the motor rotation angle. Display range: 0.000 to 360.000deg |
Varies between 0 and 360 deg: During engine start, steering operation | - |
| [Motor voltage (Command Value 2)] | Indicates the requirement for the current flowing to the motor. Display range: -327.68 to 327.67A |
Changes in proportion to the steering force: During engine start, steering operation | - |
| [PIG2 Voltage] | Indicates the boost voltage after the coil. Display range: 0.000 to 98.000V |
Approx. 27 V: During engine start, steering non-operation | - |
| Varies within 16 - 35 V: During engine start, steering operation | - | ||
| [Motor Voltage] | Indicates the motor power supply voltage. Display range: 0.000 to 98.000V |
Approx. 27 V: During engine start, steering non-operation | - |
| Varies within 4 - 35 V: During engine start, steering operation | - | ||
| [Motor Terminal Volt(U)] | Indicates the motor U terminal voltage. Display range: 0.000 to 98.000V |
Varies within 4 - 35 V: During engine start, steering operation | - |
| [Motor Terminal Volt(V)] | Indicates the motor V terminal voltage. Display range: 0.000 to 98.000V |
Varies within 4 - 35 V: During engine start, steering operation | - |
| [Motor Terminal Volt(W)] | Indicates the motor W terminal voltage. Display range: 0.000 to 98.000V |
Varies within 4 - 35 V: During engine start, steering operation | - |
| [Torque Sensor 1 Output] | Indicates the torque sensor 1 output. Display range: 0.0000 to 5.0000V |
2.3 to 2.7V: During engine start, no steering load (neutral position) | - |
| 2.3 to 3.8V: During engine start, steering to the right | - | ||
| 1.2 to 2.7V: During engine start, steering to the left | - | ||
| [Torque Sensor 2 Output] | Indicates the torque sensor 2 output. Display range: 0.0000 to 5.0000V |
2.3 to 2.7V: During engine start, no steering load (neutral position) | - |
| 1.2 to 2.7V: During engine start, steering to the right | - | ||
| 2.3 to 3.8V: During engine start, steering to the left | - | ||
| [TRQ1 Zero Point Value] | Indicates the torque sensor 1 output value at the zero point. Display range: 0.0000 to 5.0000V |
- | - |
| [TRQ2 Zero Point Value] | Indicates the torque sensor 2 output value at the zero point. Display range: 0.0000 to 5.0000V |
- | - |
| [IG ON/OFF Times] | Indicates the number of times the ignition is turned to IG ON after the diagnosis code is detected. Display range: 0 to 65535 |
- | - |
| [Heating prevention control history] | Indicates the presence of an overheat protection control history. Display contents: No/Yes |
- | - |
| [Motor Lo Power Record] | Indicates the presence of a PIG power supply voltage drop history. Display contents: No/Yes |
- | - |
| [Engine speed (RDY) signal loss history] | Indicates the presence of an engine speed signal interruption history. Display contents: No/Yes |
- | - |
| [Spd Sig Invalid Record] | Indicates the presence of a vehicle speed signal unavailability history. Display contents: No/Yes |
- | - |
| [Battery Voltage Record] | Lo Indicates the number of battery voltage drop instances. Display contents: 0 - 65535 times |
- | - |
| [Confirmation of resolver correction completion] | Indicates the resolver calibration completion state. Display contents: Calibration completed/Calibration not completed |
- | - |
| [Confirmation of torque 0 point correction completion] | Indicates the torque zero point calibration completion state. Display contents: Calibration completed/Calibration not completed |
- | - |
| [Number of Diagnostic Code(s):] | Indicates the number of stored diagnosis codes. Display range: 0 to 255 |
- | - |