FixVault
Home › Subaru › 2017 › BRZ Limited, Automatic Trans › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle (Service Information) › Speed sensor › Removal

Speed sensor: Removal

  1. Removal of under cover front AL (refer to Removal )
  2. Removal of under cover COMPL T/M (refer to Installation )
  3. Removal of transmission revolution sensor (NT)
    1. Disconnect the connector.
    2. Remove the bolt, and then remove the transmission revolution sensor (NT) and the O-ring.
    Fig 1: Locating Transmission Revolution Sensor Connector And O-Ring (NT)
    G11259386Courtesy of SUBARU OF AMERICA, INC.
  4. Removal of transmission revolution sensor (SP2)
    1. Remove the automatic transmission ASSY. (Refer to Removal )
    2. Disconnect the connector.
    3. Remove the bolt, and then remove the transmission revolution sensor (SP2) and the O-ring.
    Fig 2: Locating Transmission Revolution Sensor Connector And O-Ring (SP2)
    G11259387Courtesy of SUBARU OF AMERICA, INC.
About FixVault