Unit inspection

Check of transmission shift switch
1. Resistance inspection
  1. Measure the resistance between the terminals.

RESISTANCE SPECIFICATIONS

Inspection terminals	Inspection conditions	Standard value
3 - 4	Pull the shift switch lever RH (+) side.	Less than 10 Ω
3 - 4	Release the shift switch lever.	1 MΩ or more
1 - 4	Pull the shift switch lever LH (-) side.	Less than 10 Ω
1 - 4	Release the shift switch lever.	1 MΩ or more

Fig 1: Identifying Transmission Shift Switch Connector Terminals

Courtesy of SUBARU OF AMERICA, INC.