Navigation ASSY: Installation
- Install the navigation bracket No. 1.
- Install the navigation bracket No. 1 onto the navigation ASSY and fasten the four screws.
- Install the navigation bracket No. 2.NOTE: Perform the same procedure as with the navigation bracket No. 1.
- Install the navigation ASSY.
- Connect each connector.
- Install the navigation ASSY in place with the four bolts.
- Installation of instrument cluster finish panel SUB-ASSY CTR (large type) (Refer to Installation )
- Connection of the battery ground terminal
Standard value: T=6.0N.m {61kgf.cm} {4.4 ft.lbf}
- Settings when removing/installing battery terminals (Refer to Setting procedures at parts replacement and removal/installation )