Combination meter ASSY: Assembly

NOTE: The procedures described below are for the normal meter. Operate the TFT meter performing the same procedures as the normal meter.

1. Installation of the combination meter cover
   1. Engage six claws and install the combination meter cover.
   Fig 1: Identifying Combination Meter Cover Claws

   Courtesy of SUBARU OF AMERICA, INC.
   CAUTION: When installing the combination meter cover, make sure that each dial is secured to the positioners.
   Fig 2: Identifying Combination Meter Cover

   Courtesy of SUBARU OF AMERICA, INC.
2. Installation of the combination meter glass

1. Engage seven claws and install the combination meter glass.

Fig 3: Identifying Combination Meter Glass Claws

Courtesy of SUBARU OF AMERICA, INC.