Check Rear Gate Opener Button Circuit

Step	Check	Yes	No
1 CHECK DATA MONITOR . Using the Subaru Select Monitor, display the data of «R Gate Release SW input». NOTE: For detailed operation procedures, refer to "Application help".	Does the display change to OFF ←→ ON, when the rear gate opener button is operated?	Rear gate opener button is normal.	Go to step 2 .
2 CHECK HARNESS . Disconnect the connectors of body integrated unit and rear gate opener button. Check the harness between the body integrated unit and rear gate opener button. Connector & terminal (i84) No. 10 - (D47) No. 1:	Is harness normal?	Go to step 3 .	Repair or replace the harness.
3 CHECK HARNESS . Measure the resistance between the rear gate opener button connector and chassis ground. Connector & terminal (D47) No. 2 - Chassis ground:	Is the resistance less than 10 Ω?	Go to step 4 .	Repair or replace the harness.
4 CHECK REAR GATE OPENER BUTTON . Measure the resistance between terminals both when the rear gate opener button is pressed and when not pressed. Terminals No. 1 - No. 2:	Is the resistance less than 10 Ω when the switch is pressed and 1 MΩ or more when not pressed?	Replace the body integrated unit. Ref. to BODY INTEGRATED UNIT .	Replace the rear gate opener button.