FixVault

Outer Mirror Assembly: Disassembly

CAUTION: When removing the mirror - repair, be careful not to damage the back surface of mirror - repair with a flat tip screwdriver.
  1. Operate the remote control mirror switch to face the mirror - repair upward.
  2. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. Ref. to BATTERY .
  3. Remove the mirror - repair.
    1. Using a flat tip screwdriver, release the clip, and slide the mirror - repair downward to remove.
      Fig 1: Removing Mirror Glass
      G10272724Courtesy of SUBARU OF AMERICA, INC.
    2. Disconnect connectors. (Model with mirror heater and Subaru Rear Vehicle Detection system)
    Fig 2: Mirror Heater Connectors
    G10309250Courtesy of SUBARU OF AMERICA, INC.
  4. Release the claws, and then remove the cover - cap outer mirror lower.
    Fig 3: Outer Mirror Lower Cover Removal
    G10272726Courtesy of SUBARU OF AMERICA, INC.
  5. Release the claws, and then remove the cover - cap outer mirror.
    CAUTION: Be careful not to apply excessive force when removing the cover - cap outer mirror, as the lower hooks may become damaged.
    Fig 4: Outer Mirror Upper Cover Removal
    G10272727Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the light assembly - side turn mirror. (Model with side turn signal light)
    1. Remove the screws and pull out the light assembly - side turn mirror to the front of the vehicle.
    2. Disconnect the connector and remove the light assembly - side turn mirror.
Fig 5: Removing Side Turn Mirror Light Assembly
G10272728Courtesy of SUBARU OF AMERICA, INC.