FixVault
Home › Subaru › 2017 › Crosstrek Base › Repair and Diagnosis › Brakes › Traction Control › Vehicle Dynamics Control (VDC) System (Diagnostics) › Subaru Select Monitor › Operation › Parameter Check

Parameter Check

NOTE: The parameter data registered in the VDCCM is shown on the display.
  1. Connect the Subaru Select Monitor.
  2. On «Start» display, select «Diagnosis».
  3. On «Vehicle selection» display, input the vehicle information and select «Confirmed».
  4. On «Main Menu» display, select «Each System».
  5. On «Select System» display, select «Brake Control System».
  6. On «Select Function» display, select «Work Support».
  7. On «Work Support» display, select «Confirm on parameter».
  8. On the «Confirm on parameter» display screen, check that the applied model and grade of the target vehicle are included, and click the [OK] button.
  9. If the applied model and grade of the target vehicle are not included on the «Confirm on parameter» display screen, perform "parameter selection and registration". Ref. to PARAMETER SELECTION , OPERATION, Subaru Select Monitor.
About FixVault