FixVault
Home › Subaru › 2017 › Crosstrek Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Speed Control System (H4DO) › Accelerator Pedal › Removal

Accelerator Pedal: Removal

  1. Disconnect the ground cable from battery. Ref. to BATTERY .
  2. Disconnect the connector (A).
  3. Remove the nut (B) securing accelerator pedal assembly, and remove the accelerator pedal assembly.
Fig 1: Removing Nut Securing Accelerator Pedal Assembly
G08315852Courtesy of SUBARU OF AMERICA, INC.
About FixVault