FixVault
Home › Subaru › 2017 › Forester 2.0XT Touring › Repair and Diagnosis › Body & Frame › Windows › Window Glass & Mirrors › Power Window Control Switch › Removal › Sub-Switch › Switch - Power Window Sub Rear

Switch - Power Window Sub Rear

  1. Disconnect the ground cable from battery. Ref. to NOTE>NOTE>BATTERY .
    NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
  2. Remove the trim panel - rear door. Ref. to EXTERIOR/INTERIOR TRIM>Door Trim>REMOVAL>REAR DOOR .
  3. Remove the panel - power window sub switch rear.
    CAUTION: Be careful not to damage the trim panel - rear door with the panel - power window sub switch rear.
    1. Insert a sheet of protective paper (a) between panel - power window sub switch rear and trim panel - rear door.
    2. Remove the screws and disconnect the connector.
      Fig 1: Locating Sub Switch Rear Screws
      G09484436Courtesy of SUBARU OF AMERICA, INC.
    3. Release the claws, and then remove the panel - power window sub switch rear.
    Fig 2: Removing Panel - Power Window Sub Switch Rear
    G09484437Courtesy of SUBARU OF AMERICA, INC.
  4. Release the claws, and then remove the switch - power window sub rear.
Fig 3: Releasing Switch - Power Window Sub Rear Claws
G09484438Courtesy of SUBARU OF AMERICA, INC.
About FixVault