Electronic Throttle Control Relay: Removal

1. Disconnect the ground terminal from battery sensor. Ref. to NOTE>NOTE>BATTERY .
2. Remove the instrument panel lower cover. Ref. to EXTERIOR/INTERIOR TRIM>Instrument Panel Lower Cover>REMOVAL .
3. Remove the bolts and nuts securing the fuse block and move down the fuse block.
   Fig 1: Locating Fuse Block Bolts And Nuts

   Courtesy of SUBARU OF AMERICA, INC.
4. Remove the electronic throttle control relay from the relay block.

Fig 2: Locating Electronic Throttle Control Relay From Relay Block

Courtesy of SUBARU OF AMERICA, INC.