FixVault
Home › Subaru › 2017 › Impreza Base, 4D Sedan, Standard Trans › Repair and Diagnosis (Single Page) › Accessories & Equipment › Infotainment › Entertainment & Monitoring System › Data Communication Module › Installation › Data Communication Module

Data Communication Module

  1. Install the data communication module.
    NOTE: Align the positioning pin (a) of the data communication module with the positioning hole of the audio assembly or navigation assembly.
    Fig 1: Installing Data Communication Module
    G10309168Courtesy of SUBARU OF AMERICA, INC.
  2. Install the audio assembly or navigation assembly.
  3. Install the grille assembly - CTR ventilation.
  4. Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  5. Perform the registration if the data communication module is replaced with a new part. Ref. to ENTERTAINMENT & MONITORING>Telematics System>OPERATION .
  6. Check LED lighting status of spot map light or stereo camera cover assembly. Ref. to TELEMATICS SYSTEM (DIAGNOSTICS)Check List for Interview>CHECK>LED ILLUMINATION STATUS LIST .
About FixVault