Initialization (Factory Default)

WARNING: This page is about a different car, the 2017 Subaru Outback and 2017 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Model with 6.2 inch display

Turn the ignition switch to ACC.
Press the HOME button (a) to display the {HOME} screen.
Touch the {SETTINGS} (b) to display the {SETTINGS} screen.
Touch the {Settings General} (c) to display the {Settings General} screen.
Touch the {Restore} (d) in {Reset to Factory Settings}.

Fig 1: Display - Reset To Factory Setting Screen
Courtesy of SUBARU OF AMERICA, INC.
Touch {OK} after {Are you sure you want to delete All Data?} is displayed.
{DO NOT OPERATE. Initializing now.} is displayed, and all data deletion is initiated.
When all data is deleted, {All date has been deleted. Start up the engine to reboot.} is displayed.

Model with 7 inch display

Operation is the same as that of navigation assembly, therefore, proceed to "Navigation System". Ref. to INITIALIZATION (FACTORY DEFAULT) , OPERATION, Navigation System.