FixVault
Home › Subaru › 2017 › Impreza Base, 4D Wagon, Standard Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection System › Engine Control Module (ECM) › Removal

Engine Control Module (ECM): Removal

  1. Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Disconnect the connector in numerical order as shown in the figure.
    Fig 1: Identifying ECM Connectors
    G11252779Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the ECM from vehicle.
    Fig 2: Locating ECM Bolts
    G11252912Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the ECM bracket.
About FixVault