FixVault
Home › Subaru › 2017 › Outback 2.5i › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Anti-Theft System - Security And Locks › Keyless Entry Control Module › Installation › Sedan Model

Sedan Model

  1. Install the keyless entry control module.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb) 

  2. Install the trim panel assembly - rear shelf. <Ref. to INSTALLATION , Rear Shelf Trim.>
  3. Connect the ground terminal to battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
About FixVault