FixVault
Home › Subaru › 2017 › Outback 2.5i › Repair and Diagnosis › Accessories & Equipment › Entertainment Systems › Entertainment System › Power Amplifier › Removal

Power Amplifier: Removal

NOTE: Remove the power amplifier assembly after sliding the passenger's seat back and forth as necessary.
  1. Disconnect the ground terminal from battery sensor. Ref. to BATTERY
  2. Remove the power amplifier assembly.
    1. Remove the harness clip, and disconnect each connector.
    2. Remove the nut and remove the power amplifier assembly.
Fig 1: Identifying Power Amplifier Assembly Harness Clip And Nut
G10272649Courtesy of SUBARU OF AMERICA, INC.
About FixVault