FixVault

Sedan Model

  1. Disconnect the ground terminal from battery sensor. Ref. to BATTERY
  2. Remove the trim panel - trunk lid. Ref. to REMOVAL , Trunk Room Trim.
  3. Remove the garnish - trunk. Ref. to REMOVAL , Trunk Lid Garnish.
  4. Remove the rearview camera assembly.
CAUTION: Do not drop or apply any impact to the rearview camera because it is a precision equipment.
  1. Disconnect the connector.
  2. Release the claw and hook, and then remove the rearview camera assembly.
Fig 1: Removing Rearview Camera Assembly Claw And Hook (Sedan Model)
G10272668Courtesy of SUBARU OF AMERICA, INC.