Inspection Mode 3
| DTC | Item | Note |
|---|---|---|
| B2606 | POWER SEAT POSITION SENSOR CIRCUIT LOW | - |
Diagnostic procedure:
- Perform the Clear Memory Mode. Ref. to CLEAR MEMORY MODE .
- Read the DTC and check that the DTC is not displayed. Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) .
- Operate the power seat switch. (Any of slide/reclining/lifter/tilt)
- Turn the ignition switch ON → OFF, and wait for 45 seconds or more.
- Turn the ignition switch OFF → ON, and wait for 5 seconds or more.
- Read the DTC and check that the DTC is not displayed. Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) .
NOTE:
If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.