Front Seat: Installation

Bring the front seat inside the vehicle.
CAUTION: Be careful not to damage the body.
Connect the connectors located under the front seat.
Install the seat assembly.
CAUTION: Tighten the slide rail assembly installing bolts in the order as shown in the figure, in several steps by gradually increasing the torque until they reach the specified torque.

Fig 1: Slide Rail Assembly Installation Bolt Tightening Sequence
Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

Front seat assembly: 53 N.m (5.4 kgf-m, 39.1 ft-lb)
Connect the ground terminal to battery sensor. Ref. to BATTERY
NOTE: Repair Contents.
Install the headrest assembly - front.