FixVault
Home › Subaru › 2017 › Outback 2.5i › Repair and Diagnosis › Electrical › Charging Systems › Starting System & Charging System (H4DO) › Battery Sensor › Removal

Battery Sensor: Removal

  1. Disconnect the ground terminal from battery sensor. Ref. to BATTERY
    NOTE: Repair Contents.
  2. Remove the clip (A) from the battery holder.
  3. Disconnect the connector (B) from the battery sensor, and remove the battery sensor.
Fig 1: Removing Battery Sensor Connector And Holder Clip
G10263203Courtesy of SUBARU OF AMERICA, INC.
About FixVault