FixVault
Home › Subaru › 2017 › Outback 2.5i › Repair and Diagnosis › Engine Performance › Engine Control Systems › Speed Control System (H4DO) › Accelerator Pedal › Removal

Accelerator Pedal: Removal

  1. Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
  2. Disconnect the connector (A).
  3. Remove the nut (B) securing accelerator pedal assembly, and remove the accelerator pedal assembly.
Fig 1: Accelerator Pedal Assembly Connector And Nuts
G10263085Courtesy of SUBARU OF AMERICA, INC.
About FixVault