Power Rear Gate (PRG) Control Module - Design Change (07-179-20)
Publication date: 2020-10-05Reference number: 07-179-20
POWER REAR GATE (PRG) CONTROL MODULE - DESIGN CHANGE
TECHNICAL SERVICE BULLETIN
| SUBARU: | 2017-19 Outback |
APPLICABILITY
2017-19MY Outback
INTRODUCTION
This bulletin announces a design change made to the PRG control module. This change is in response to a limited number of customer concerns regarding the vehicle's battery becoming discharged after the rear gate is left open for an extended period of time. The discharge occurs because current PRG control module logic keeps CAN communication active. Logic changes have been incorporated into the new module to allow the CAN system to "go to sleep" after a period of time to prevent current draw and optimize operation of the PRG system.
PRODUCTION CHANGE INFORMATION
This bulletin will be revised with starting VIN information for the change when it becomes available.
PART INFORMATION
| Description | Part Number | Application |
|---|---|---|
| ECU-POWER REAR GATE | 63350AL10B | 2017-19MY Outback |
REMINDER : Always order the most up-to-date replacement parts based on the specific VIN being repaired.
SERVICE PROCEDURE/INFORMATION
REMINDER : Customer satisfaction and retention starts with performing quality repairs.
The service procedures for replacing the PRG control module remain unchanged. Always refer to the applicable Service Manual and review the full requirements of the repair being performed. The Service Manual procedures contain information critical to performing an effective repair the first time, every time. This includes but is not limited to important SAFETY precautions, proper inspection criteria, necessary special tools, required processes and related one-time-use parts needed for a complete and lasting repair.
WARRANTY/CLAIM INFORMATION
For vehicles within the Basic New Car Limited Warranty period or covered by an active Subaru Added Security Classic or Gold plan, this repair may be submitted using the following claim information:
| Labor Description | Labor Operation # | Labor Time | Fail Code |
|---|---|---|---|
| PRG CONTROL MODULE R&R | B850-965 | 0.5 | UPW-48 |
| PRG SYSTEM TESTING & DIAGNOSIS | C850-950 | 0.4 |
IMPORTANT REMINDERS:
- SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time.
- Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
- Always refer to STIS for the latest service information before performing any repairs.