FixVault
Home › Subaru › 2017 › Outback 2.5i › Repair and Diagnosis › Steering › Power Steering › Power Steering System (Service Information) › Relay And Fuse › Installation

Relay And Fuse: Installation

  1. Install the steering heater relay.
  2. Install the body integrated unit (fuse & relay box).

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb) 

  3. Install the panel - knee guard.

    Tightening torque: 

    7 N.m (0.7 kgf-m, 5.2 ft-lb) 

  4. Install the cover assembly - instrument panel LWR driver.
  5. Connect the ground terminal to battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
About FixVault