Wheel Alignment: Inspection: Camber
- Place the front wheel on the turning radius gauge.NOTE: Make sure the ground contact surfaces of the front and rear wheels are at the same height.
- Set the adapter into the center of wheel, and then set the wheel alignment gauge.
- Measure the camber angle in accordance with the operation manual for wheel alignment gauge.
| Tire size | Camber (difference between RH and LH 45' or less) | ||
|---|---|---|---|
| Front | Rear | ||
| Sedan model | 225/55R17 225/50R18 |
-0°15'±0°45' | -1°25'±0°45' |
| OUTBACK model | 225/65R17 225/60R18 |
0°00'±0°45' | -1°00'±0°45' |