Extension Case: Assembly
- Press-fit the dust cover into extension case.
- Install the extension case oil seal to extension case. <Ref. to REPLACEMENT , Differential Side Retainer Oil Seal.>
- Install all plugs.NOTE:
- Use a new O-ring or a gasket.
- Apply CVTF to the O-rings.
Tightening torque:
T1: 22 N.m (2.2 kgf-m, 16.2 ft-lb)
T2: 35 N.m (3.6 kgf-m, 25.8 ft-lb)