Check Accelerator Pedal Sensor Area (Method With SUBARU Select Monitor)
WARNING: This page is about a different variant/trim than selected.
- Turn the ignition switch to ON. (Engine OFF)
- Read the accelerator pedal opening angle signal and voltage of accelerator pedal sensor using Subaru Select Monitor. <Ref. to DISPLAY CURRENT ENGINE DATA , OPERATION, Subaru Select Monitor.> <Ref. to DISPLAY CURRENT ENGINE DATA , OPERATION, Subaru Select Monitor.>
| Accelerator pedal sensor | Accelerator pedal opening angle signal | Standard |
|---|---|---|
| Main | 0.0% | 0.3 - 1.1 V |
| 100.0% | 2.3 - 3.8 V | |
| Sub | 0.0% | 0.3 - 1.1 V |
| 100.0% 2.3 | - 3.8 V |