Auto Headlight Beam Leveler Control Module: Removal

CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". <Ref. to CAUTION , General Description.>

1. Disconnect the battery ground cable and wait for at least 60 seconds before starting work. <Ref. to BATTERY , NOTE, Note.>
   NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
2. Remove the cover assembly - instrument panel LWR driver. <Ref. to REMOVAL , Instrument Panel Lower Cover.>
3. Remove the knee airbag module. <Ref. to REMOVAL , Knee Airbag Module.>
4. Release the lock and remove the fuse holder.
   Fig 1: Locating Fuse Holder

   Courtesy of SUBARU OF AMERICA, INC.
5. Remove the relay & fuse box.
   1. Disconnect the connector.
   2. Remove the bolts and nuts, and remove the relay & fuse box.
   Fig 2: Removing Relay & Fuse Box Bolts And Nuts

   Courtesy of SUBARU OF AMERICA, INC.
6. Disconnect the connector of body integrated unit.
   Fig 3: Disconnecting Connector Of Body Integrated Unit

   Courtesy of SUBARU OF AMERICA, INC.
7. Remove the auto headlight beam Leveler Control Module.
   1. Disconnect the connector.
   2. Release the claws and pull out the auto headlight beam Leveler Control Module.

Fig 4: Pulling Out Auto Headlight Beam Leveler Control Module

Courtesy of SUBARU OF AMERICA, INC.