Inspection Mode 5
| DTC | Item | Note |
|---|---|---|
| B1015 | KEY INTERLOCK CIRCUIT | - |
Diagnostic procedure:
- Perform the Clear Memory Mode. <Ref. to CLEAR MEMORY MODE .>
- Read the DTC and check that the DTC is not displayed. <Ref. to
READ DIAGNOSTIC TROUBLE CODE (DTC) .>NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1.
- After the ignition switch is ON, press the shift knob switch and wait for 10 seconds or more.
- Read the DTC and check that the DTC is not displayed. <Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) .>
NOTE:
If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.