Front Inner Remote: Removal

1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. <Ref. to BATTERY , NOTE, Note.>
   NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
2. Remove the trim panel - front door. <Ref. to FRONT DOOR , REMOVAL, Door Trim.>
3. Remove the screw, and remove the remote assembly - door.

CAUTION: The remote assembly - door is tightened with the plate. Be careful not to drop or damage the part  .

Fig 1: Locating Door Remote Assembly Screw

Courtesy of SUBARU OF AMERICA, INC.