FixVault
Home › Subaru › 2017 › WRX Base › Repair and Diagnosis › Body & Frame › Door Locks › Anti-Theft System - Security And Locks › Impact Sensor › Installation

Impact Sensor: Installation

  1. Pull out the key from the ignition switch, or turn the ignition switch to OFF.
  2. Close all doors and trunk lid.
  3. Press the UNLOCK button of the keyless transmitter or access key.
  4. Connect the battery ground terminal. <Ref. to BATTERY , NOTE, Note.>
  5. Install the impact sensor.
  6. Change the setting of impact sensor using Subaru Select Monitor.
About FixVault