STI Model

NOTE: Before installation, remove mud and foreign matter from the disc brake assembly.

Apply a thin coat of grease to the side of the pad - disc brake front, both sides of the shim - disc brake front inner and the shim mounting surface of the pad - disc brake front.
Preparation items:

Grease (pad side (A)): An item contained in the pad kit, Molykote M7439 or equivalent

Grease (shim and pad (B)): An item contained in the pad kit or Dow Corning Molykote AS880N

Fig 1: Grease Applying Area On Disc Brake Front Pad
Courtesy of SUBARU OF AMERICA, INC.
Install the pad - disc brake front.
NOTE: Install so that the arrow (a) faces upward.

Fig 2: Installing Disc Brake Front Pad
Courtesy of SUBARU OF AMERICA, INC.
Install the cross spring.
Install the pin - disc brake.
Install the clip - slide pin.
Install the front wheels.
Tightening torque:

120 N.m (12.2 kgf-m, 88.5 ft-lb)