Fuel Pipe Insulator No. 3

Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Note.>
Remove the intake manifold. <Ref. to REMOVAL , Intake Manifold.>
Disconnect the connector (A) from the EGR control valve.
Remove the bolts (B) securing the EGR cooler to the EGR control valve.
Remove the preheater hose (C) from the EGR control valve.

Fig 1: EGR Control Valve Connector, EGR Cooler Bolts And Preheater Hose
Courtesy of SUBARU OF AMERICA, INC.
Remove the EGR control valve.

Fig 2: Locating EGR Control Valve Bolts
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector (A) on the fuel pressure sensor, and remove the fuel pipe insulator No. 3.

Fig 3: Fuel Pressure Sensor Connector

Courtesy of SUBARU OF AMERICA, INC.