FixVault
Home › Subaru › 2017 › WRX Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Speed Control System (2.0L) › Accelerator Pedal › Removal

Accelerator Pedal: Removal

  1. Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Note.>
  2. Disconnect the connector (A).
  3. Remove the nut (B) securing accelerator pedal assembly, and remove the accelerator pedal assembly.
Fig 1: Accelerator Pedal Assembly Nut Location
G10267370Courtesy of SUBARU OF AMERICA, INC.
About FixVault