Each Impact Sensor

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

The sensor shapes vary depending on the locations.

How to disconnect:

NOTE:

When pulling the slide lock or disconnecting the connector, be sure to hold the connector, not the harness, to disconnect.

Pull the lock arm (a) one step in the direction of arrow while pushing.

While pressing down the lock arm (a), hold the outer part of connector to disconnect the connector.

Courtesy of SUBARU OF AMERICA, INC.

How to connect:
NOTE:
Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked.

Insert the connector, and push the lock arm securely until a clicking sound is heard.