FixVault
Home › Subaru › 2017 › WRX Base › Repair and Diagnosis › External Pages › Different car › Section 42 (Anti-Theft System - Security And Locks) › Front Hood Lock Assembly › Installation › Hood Cable Assembly

Hood Cable Assembly

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to  AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION 

  1. Check the cable for deformation such as fray before installation.
  2. Install the cable assembly front hood.
    NOTE:

    Tie the string left on the body to the cable assembly front hood and pull it out of the vehicle. 

  3. Install the opener handle.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  4. Install the lock assembly front hood. Ref. to SECURITY AND LOCKS>FRONT HOOD LOCK ASSEMBLY>INSTALLATION>HOOD LOCK ASSEMBLY 
  5. Install the cover LWR driver. Ref. to EXTERIOR/INTERIOR TRIM>INSTRUMENT PANEL LOWER COVER>INSTALLATION
  6. Install the mud guard front LH. Ref. to EXTERIOR/INTERIOR TRIM>MUD GUARD>INSTALLATION
  7. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
About FixVault