Inspection Using Can Diagnostic

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.

Trouble causes:

Improper body integrated unit setting

CAUTION:

Before performing diagnosis, refer to "CAUTION" in "General Description". Ref. to LAN SYSTEM (DIAGNOSTICS)>GENERAL DESCRIPTION>CAUTION

CHECK BODY INTEGRATED UNIT REGISTRATION STATUS .
Check that settings of body integrated unit correspond to vehicle equipment. Ref. to BODY CONTROL (DIAGNOSTICS)>REGISTRATION BODY INTEGRATED UNIT

Does the vehicle equipment correspond to settings?

Yes : Go to 2.

No : Match the settings of the body integrated unit with the vehicle equipment.
CHECK BODY INTEGRATED UNIT CUSTOMIZE SETTING .
Check that settings of body integrated unit correspond to vehicle condition. Ref. to BODY CONTROL (DIAGNOSTICS)>CUSTOMIZE

Do the customize settings correspond to the vehicle condition?

Yes : Go to 3.

No : Match the settings of the body integrated unit with the vehicle condition.
CHECK FACTORY INITIAL SETTING OF BODY INTEGRATED UNIT .
Confirm [Factory initial setting] of body integrated unit registrations is [Market]. Ref. to BODY CONTROL (DIAGNOSTICS)>REGISTRATION BODY INTEGRATED UNIT

Is it set to [Market]?

Yes : Go to step 4 in the Basic Diagnostic Procedure. Ref. to LAN SYSTEM (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE>PROCEDURE

No : Switch from [Factory] to [Market].