Automatic Transmission/Transaxle: Notes

Illustration	Tool number	Name	Remarks
Courtesy of SUBARU OF AMERICA, INC.	398527700	PULLER ASSY	Used for removing extension housing rear oil seal.
Courtesy of SUBARU OF AMERICA, INC.	09325-40010	TRANSMISSION OIL PLUG	Used for installing extension housing rear oil seal.
Courtesy of SUBARU OF AMERICA, INC.	498575400	PRESSURE GAUGE ADAPTER	Used when measuring hydraulic pressure for line pressure.
Courtesy of SUBARU OF AMERICA, INC.	18681AA040	OIL PRESSURE GAUGE ADAPTER	Used when measuring hydraulic pressure for line pressure.
Courtesy of SUBARU OF AMERICA, INC.	498897700	PRESSURE GAUGE ADAPTER SET	Used when measuring hydraulic pressure for line pressure.
Courtesy of SUBARU OF AMERICA, INC.	18750AA010	STOPPER	Used for removing automatic transmission ASSY from engine and installing it to engine. Used for preventing torque converter from falling.
Courtesy of SUBARU OF AMERICA, INC.	18355AA000	PULLEY WRENCH	Used for securing crank pulley.
Courtesy of SUBARU OF AMERICA, INC.	18334AA000	PIN SET	Used for securing crank pulley.
Courtesy of SUBARU OF AMERICA, INC.	12281-38150	ENGINE HANGER	Used for removing and installing automatic transmission ASSY.
Courtesy of SUBARU OF AMERICA, INC.	90119-14120	BOLT	Used for removing and installing automatic transmission ASSY.
Courtesy of SUBARU OF AMERICA, INC.	99099AJ000	ENGINE HANGER	Used for removing and installing automatic transmission ASSY.
Courtesy of SUBARU OF AMERICA, INC.	18679AA020	ADJUSTER	Used for removing and installing automatic transmission ASSY.
Courtesy of SUBARU OF AMERICA, INC.	18632AA010	STAND ASSY	Used for removing and installing automatic transmission ASSY.
Courtesy of SUBARU OF AMERICA, INC.	498247001	MAGNET BASE	Used for measuring runout, etc.
Courtesy of SUBARU OF AMERICA, INC.	09351-32010	TOOL ONE-WAY CLUTCH TEST	Used for unit inspection of torque converter.
Courtesy of SUBARU OF AMERICA, INC.	09351-32020	STOPPER STATOR	Used for unit inspection of torque converter.
Courtesy of SUBARU OF AMERICA, INC.	09387-00110	CLUTCH COMPRESSION WRENCH	Used for removing and installing NO. 1 clutch balancer.
Courtesy of SUBARU OF AMERICA, INC.	09320-89010	COMPRESSOR TRANSFER CLUTCH SPR	Used for removing and installing direct clutch piston SUB-ASSY.
Courtesy of SUBARU OF AMERICA, INC.	09350-07050	COMPRESSOR PISTON SPR NO. 3	Used for removing and installing 1st & reverse brake return spring SUB-ASSY.
Courtesy of SUBARU OF AMERICA, INC.	09350-07080	PULLER BRAKE REACTION SLEEVE	Used for removing brake reaction sleeve.
Courtesy of SUBARU OF AMERICA, INC.	09350-07090	BRAKE NO. 1 PISTON PULLER	Used for removing NO. 4 brake piston.
Courtesy of SUBARU OF AMERICA, INC.	09350-06120	MEASURE TERMINAL NO. 2	Used for measuring piston stroke of NO. 2 brake.
Courtesy of SUBARU OF AMERICA, INC.	09350-07020	OIL PUMP PULLER	Used for installing NO. 2 brake piston return spring SUB-ASSY.
Courtesy of SUBARU OF AMERICA, INC.	09351-04020	SPRING COMPRESSOR NO. 1	Used for installing brake piston return spring SUB-ASSY.
Courtesy of SUBARU OF AMERICA, INC.	09351-04010	PIPE	Used for installing brake piston return spring SUB-ASSY.
Courtesy of SUBARU OF AMERICA, INC.	09387-00070	WRENCH 1st & Rev BRAKE	Used for installing No. 3 clutch balancer.
Courtesy of SUBARU OF AMERICA, INC.	18762AA020	COMPRESSOR SPECIAL TOOL	Used when assembling NO. 2 brake.
Courtesy of SUBARU OF AMERICA, INC.	18762AA030	COMPRESSOR SPECIAL TOOL	Used for disassembling NO. 3 brake cylinder ASSY.
Courtesy of SUBARU OF AMERICA, INC.	-	Subaru Select Monitor 4	Used for various settings and diagnosing electrical system failure. NOTE: For detailed operation procedures of the Subaru Select Monitor 4, refer to "PC application help".