 Courtesy of SUBARU OF AMERICA, INC.
|
20099PA010 |
INSTALLER & REMOVER |
- Used for replacing rear axle carrier bushing.
- Used with BUSHING REMOVER.
|
 Courtesy of SUBARU OF AMERICA, INC.
|
20099FG000 |
BUSHING REMOVER |
- Used for replacing rear axle carrier bushing.
- Used with INSTALLER & REMOVER.
|
 Courtesy of SUBARU OF AMERICA, INC.
|
28399AG000 |
HUB STAND |
Used for removing hub bolt. |
 Courtesy of SUBARU OF AMERICA, INC.
|
927080000 |
HUB STAND |
Used for assembling hub bolt. |
 Courtesy of SUBARU OF AMERICA, INC.
|
498447120 |
INSTALLER |
Used for installing rear differential carrier oil seal. |
 Courtesy of SUBARU OF AMERICA, INC.
|
499755502 |
PRESS |
Used for installing rear differential carrier oil seal. |
 Courtesy of SUBARU OF AMERICA, INC.
|
20299AG010 |
PRESS SNAP RING |
Used for installing rear differential side gear shaft oil seal. |
 Courtesy of SUBARU OF AMERICA, INC.
|
18355AA000 |
PULLEY WRENCH |
Used for securing companion flange RR. |
 Courtesy of SUBARU OF AMERICA, INC.
|
18334AA000 |
PULLEY WRENCH PIN SET |
Used for securing companion flange RR. |
 Courtesy of SUBARU OF AMERICA, INC.
|
499877000 |
RACE 4-5 INSTALLER |
Used for removing rear differential dust deflector. |
 Courtesy of SUBARU OF AMERICA, INC.
|
398477702 |
DRIFT |
Used for installing rear differential case bearing. |
 Courtesy of SUBARU OF AMERICA, INC.
|
499277200 |
INSTALLER |
Used for installing rear differential dust deflector. |
 Courtesy of SUBARU OF AMERICA, INC.
|
499225500 |
GAUGE |
Used for installing rear differential dust deflector. |
 Courtesy of SUBARU OF AMERICA, INC.
|
09504-22012 |
DIFFERENTIAL SIDE WASHER REMOVER & REPLACER |
Used for removing and installing rear differential side washer. |
 Courtesy of SUBARU OF AMERICA, INC.
|
09506-30012 |
DIFFERENTIAL DRIVE PINION REAR BEARING CONE REPLACER |
Used for installing rear drive pinion tapered roller bearing RR. |
 Courtesy of SUBARU OF AMERICA, INC.
|
09556-22010 |
DRIVE PINION FRONT BEARING REMOVER |
Used for removing rear drive pinion tapered roller bearing FR. |
 Courtesy of SUBARU OF AMERICA, INC.
|
41399CA000 |
REAR DIFFERENTIAL MOUNT CUSHION REMOVER AND REPLACER |
Used for removing and installing rear differential mount cushion NO. 2. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(41399CA010) |
REMOVER |
Used for removing rear differential mount cushion NO. 2. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(41399CA020) |
BASE NO. 1 |
Used for removing rear differential mount cushion NO. 2. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(41399CA030) |
BASE NO. 2 |
Used for installing rear differential mount cushion NO. 2. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(41399CA040) |
REPLACER |
Used for installing rear differential mount cushion NO. 2. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(41399FG050) |
SLEEVE |
Used for removing and installing rear differential mount cushion NO. 2. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(41399FG061) |
RING |
Used for removing and installing rear differential mount cushion NO. 2. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(41399FG070) |
NUT |
Used for removing and installing rear differential mount cushion NO. 2. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(41399FG080) |
BEARING |
Used for removing and installing rear differential mount cushion NO. 2. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(41399FG091) |
SHAFT |
Used for removing and installing rear differential mount cushion NO. 2. |
 Courtesy of SUBARU OF AMERICA, INC.
|
41399CA050 |
REAR DIFFERENTIAL MOUNT CUSHION REMOVER AND REPLACER |
Used for removing and installing rear differential mount cushion NO. 1. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(41399CA060) |
REMOVER |
Used for removing rear differential mount cushion NO. 1. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(41399CA070) |
BASE NO. 1 |
Used for removing rear differential mount cushion NO. 1. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(41399CA080) |
BASE NO. 2 |
Used for installing rear differential mount cushion NO. 1. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(41399CA090) |
REPLACER |
Used for installing rear differential mount cushion NO. 1. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(41399CA100) |
SLEEVE |
Used for removing and installing rear differential mount cushion NO. 1. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(41399CA110) |
PLATE |
Used for removing and installing rear differential mount cushion NO. 1. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(41399CA120) |
NUT |
Used for removing and installing rear differential mount cushion NO. 1. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(41399CA130) |
BEARING |
Used for removing and installing rear differential mount cushion NO. 1. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(41399CA140) |
BOLT |
Used for removing and installing rear differential mount cushion NO. 1. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(41399CA150) |
SHAFT |
Used for removing and installing rear differential mount cushion NO. 1. |
 Courtesy of SUBARU OF AMERICA, INC.
|
09710-30012 |
REAR SUSPENSION BUSHING TOOL SET |
Used for installing rear differential case bearing. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(09710-04081) |
BASE |
Used for installing rear differential case bearing. |
 Courtesy of SUBARU OF AMERICA, INC.
|
09950-00020 |
BEARING REMOVER |
- Used for removing rear differential dust deflector.
- Used for removing rear drive pinion tapered roller bearing RR.
|
 Courtesy of SUBARU OF AMERICA, INC.
|
09950-30012 |
PULLER A SET |
Used for removing and installing rear drive pinion companion flange RR. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(09951-03010) |
UPPER PLATE |
Used for removing and installing rear drive pinion companion flange RR. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(09953-03010) |
CENTER BOLT |
Used for removing and installing rear drive pinion companion flange RR. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(09954-03010) |
ARM |
Used for removing and installing rear drive pinion companion flange RR. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(09955-03030) |
LOWER PLATE 130 |
Used for removing and installing rear drive pinion companion flange RR. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(09956-03030) |
ADAPTER 20 |
Used for removing and installing rear drive pinion companion flange RR. |
 Courtesy of SUBARU OF AMERICA, INC.
|
09950-40011 |
PULLER B SET |
Used for removing rear differential case bearing. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(09951-04020) |
HANGER 200 |
Used for removing rear differential case bearing. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(09952-04010) |
SLIDE ARM |
Used for removing rear differential case bearing. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(09953-04030) |
CENTER BOLT 200 |
Used for removing rear differential case bearing. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(09954-04010) |
ARM 25 |
Used for removing rear differential case bearing. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(09955-04061) |
CLAW NO. 6 |
Used for removing rear differential case bearing. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(09957-04010) |
ATTACHMENT |
Used for removing rear differential case bearing. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(09958-04011) |
HOLDER |
Used for removing rear differential case bearing. |
 Courtesy of SUBARU OF AMERICA, INC.
|
09950-60010 |
REPLACER SET |
Used for removing rear differential case bearing. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(09951-00350) |
REPLACER 35 |
Used for removing rear differential case bearing. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(09951-00480) |
REPLACER 48 |
Used for removing rear differential case bearing. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(09952-06010) |
ADAPTER |
Used for removing rear differential case bearing. |
 Courtesy of SUBARU OF AMERICA, INC.
|
09950-60020 |
REPLACER SET NO. 2 |
- Used for installing rear drive pinion tapered roller bearing FR.
- Used for installing rear drive pinion tapered roller bearing RR.
|
 Courtesy of SUBARU OF AMERICA, INC.
|
(09951-00720) |
REPLACER 72 |
Used for installing rear drive pinion tapered roller bearing FR. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(09951-00890) |
REPLACER 89 |
Used for installing rear drive pinion tapered roller bearing RR. |
 Courtesy of SUBARU OF AMERICA, INC.
|
09950-70010 |
HANDLE SET |
- Used for installing rear drive pinion tapered roller bearing FR.
- Used for installing rear drive pinion tapered roller bearing RR.
|
 Courtesy of SUBARU OF AMERICA, INC.
|
(09951-07100) |
HANDLE 100 |
Used for installing rear drive pinion tapered roller bearing FR. |
 Courtesy of SUBARU OF AMERICA, INC.
|
(09951-07200) |
HANDLE 200 |
Used for installing rear drive pinion tapered roller bearing RR. |