Front Shock Absorber: Installation

1. Using three new nuts, install the front shock absorber w/coil spring (upper side).

   Standard value: T=23N.m {235kgf.cm} {17.0ft.lbf} 

2. Using the two bolts and two new nuts, install the shock absorber w/coil spring to the steering knuckle LH.
   CAUTION: Insert the bolts from the rear of the vehicle.

   Standard value: T=155N.m {1581kgf.cm} {114.3ft.lbf} 

1. Install the front stabilizer link ASSY LH to the shock absorber w/coil spring.
2. Secure the stud bolt and install the part with a new nut.

   Standard value: T=46N.m {469kgf.cm} {33.9ft.lbf} 

1. Using a bolt, install the front flexible hose No. 1 to the shock absorber w/coil spring.

   Standard value: T=33N.m {337kgf.cm} {24.3ft.lbf} 

1. Install the front suspension support dust cover LH on the shock absorber w/coil spring.

1. Install the two clamps of the wiring harness for the speed sensor FR LH on the shock absorber w/coil spring.

Standard value: T=120N.m {1224kgf.cm} {88.5ft.lbf} 

1. Lower and remove the jack, and bounce the vehicle several times to stabilize the front suspension.