FixVault
Home › Subaru › 2018 › BRZ Limited, Standard Trans › Repair and Diagnosis › Suspension › Wheel Alignment › Front Suspension System › Front Stabilizer Bar › Inspection

Front Stabilizer Bar: Inspection

  1. Inspection of front stabilizer link ASSY LH
    1. Inspection of ball joint
      1. Using aluminum plate, secure the front stabilizer link ASSY LH in a vise.
      2. Install the mounting nut on the stud of the front stabilizer link ASSY LH.
      3. Vibrate and turn the stud.

        Criteria: There is no abnormal interference or play during vibration and turning.

      4. If there is abnormal interference or play during vibration and turning, replace the front stabilizer link ASSY LH.
    2. Dust cover inspection
      1. Check the dust cover for cracks or grease leakage.
      2. If there are cracks or grease leakage on the dust cover, replace the front stabilizer link ASSY LH.
G12588554Courtesy of SUBARU OF AMERICA, INC.
About FixVault