FixVault
Home › Subaru › 2018 › BRZ Premium › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt System › Child Seat Restraining Device (ISO-FIX) › Installation

Child Seat Restraining Device (ISO-FIX): Installation

  1. Installation of the child restraint seat tether anchor bracket
    1. Insert the guide and temporally install the child restraint seat tether anchor bracket.
    2. Install the child restraint seat tether anchor bracket with the bolt.

      Standard value: T=25N.m {255kgf.cm} {18.4ft.lbf} 

      NOTE: Install both parts using the same procedures.
  2. Installation of package tray trim panel ASSY (Refer to INSTALLATION , Step 2)
  3. Installation of the rear window side garnish RH (Refer to INSTALLATION , Step 12)
  4. Installation of rear window side garnish LH
    NOTE: Install the part in the same manner as RH side.
  5. Installation of the quarter trim lid RH (Refer to INSTALLATION , Step 14)
  6. Installation of quarter trim lid LH
    NOTE: Install the part in the same manner as RH side.
  7. Installation of the quarter lower trim RH (Refer to INSTALLATION , Step 16)
  8. Installation of quarter lower trim LH
    NOTE: Install the part in the same manner as RH side.
  9. Installation of front door opening trim weather strip RH
  10. Installation of front door opening trim weather strip LH
  11. Installation of the front door scuff plate RH (Refer to INSTALLATION )
  12. Installation of front door scuff plate LH
    NOTE: Install the part in the same manner as RH side.
  13. Installation of the bench type rear seat backrest ASSY (Refer to INSTALLATION )
  14. Installation of separate type rear seat cushion ASSY (Refer to INSTALLATION )
  15. Installation of the separate type rear seat cushion ASSY LH
About FixVault