FixVault
Home › Subaru › 2018 › Crosstrek Base, Automatic CVT Trans › Repair and Diagnosis (Single Page) › Accessories & Equipment › Headlights › Lighting System › Auto Headlight Beam Leveler Control Module › Removal

Auto Headlight Beam Leveler Control Module: Removal

CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>General Description>CAUTION .
  1. Disconnect the battery ground cable and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the cover assembly - instrument panel LWR driver. Ref. to EXTERIOR/INTERIOR TRIM>Instrument Panel Lower Cover>REMOVAL .
  3. Remove the knee airbag module. Ref. to AIRBAG SYSTEM>Knee Airbag Module>REMOVAL .
  4. Remove the auto headlight beam leveler CONTROL MODULE.
    1. Disconnect the connector.
    2. Remove the bolts, and pull out the auto headlight beam leveler CONTROL MODULE.
      G11246005Courtesy of SUBARU OF AMERICA, INC.
About FixVault