FixVault
Home › Subaru › 2018 › Crosstrek Base, Automatic CVT Trans › Repair and Diagnosis › Brakes › Traction Control › Vehicle Dynamics Control (VDC) System › Rear ABS Wheel Speed Sensor › Removal

Rear ABS Wheel Speed Sensor: Removal

  1. Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Lift up the vehicle, and then remove the rear wheels.
  3. Remove the rear ABS wheel speed sensor.
    CAUTION:
    • Be careful not to damage the sensor.
    • Do not apply excessive force to the sensor harness.
    • Leave the sensor harness clamp on the vehicle side.
    1. Disconnect the connector from the rear ABS wheel speed sensor.
    2. Remove the harness clamp and bolts, and remove the rear ABS wheel speed sensor from the rear axle housing.
      • Crosstrek model
        G12392631Courtesy of SUBARU OF AMERICA, INC.
About FixVault