Control Valve Body: Inspection

• Check each part for damage or dust.
• Measure the resistance of each solenoid, sensor and ground wire.
  NOTE: Measurement should be performed at a temperature of 20°C (68°F).

Courtesy of SUBARU OF AMERICA, INC.

• Solenoid 

  Solenoid	Terminal No.	Standard
  Primary UP solenoid	No. 2-Control valve body	Approx. 10-13.5 Ω
  Secondary solenoid	No. 3-Control valve body	Approx. 5-7 Ω
  F & R clutch solenoid	No. 4-Control valve body	Approx. 4-6 Ω
  Primary DOWN solenoid	No. 7-Control valve body	Approx. 10-13.5 Ω
  Lock-up duty solenoid	No. 9-Control valve body	Approx. 10-13.5 Ω
  AWD solenoid	No. 10-Control valve body	Approx. 2-4.5 Ω

• Oil temperature sensor 

  Sensor	Terminal No.	Standard At 20°C (68°F)
  Oil temperature sensor	No. 1-No. 6	Approx. 2.5 kΩ

• Transmission ground 

  Terminal No.	Standard
  No. 8-Control valve body	Less than 1 Ω