FixVault
Home › Subaru › 2018 › Crosstrek Base, Standard Trans › Repair and Diagnosis (Single Page) › Accessories & Equipment › Entertainment Systems › Entertainment System › Data Communication Module › Removal › Backup Battery

Backup Battery

  1. Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>BATTERY
  2. Remove the data communication module. Ref. to ENTERTAINMENT & MONITORING>Data Communication Module>REMOVAL>DATA COMMUNICATION MODULE 
  3. Remove the backup battery.
    1. Remove the screws, and then remove the battery cover.

      Preparation tool:

      TORX® T10

    2. Disconnect the connector and remove the backup battery.
      G10309167Courtesy of SUBARU OF AMERICA, INC.
About FixVault