FixVault
Home › Subaru › 2018 › Crosstrek Base, Standard Trans › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Anti-Theft System - Security And Locks › Keyless Entry Control Module › Installation › 4 Door Model

4 Door Model

  1. Install the keyless entry control module.

    Tightening torque: 

    7.5N.m (0.8kgf-m, 5.5ft-lb)

  2. Install the trim panel assembly - rear shelf. Ref. to EXTERIOR/INTERIOR TRIM>Rear Shelf Trim>INSTALLATION .
  3. Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  4. When the keyless entry control module is replaced, register the transmitter ID. (Model with TPMS) Ref. to TIRE PRESSURE MONITOR (DIAGNOSTICS)>Register Transmitter (ID)>OPERATION .
About FixVault