FixVault
Home › Subaru › 2018 › Crosstrek Base, Standard Trans › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Anti-Theft System - Security And Locks › Keyless Entry Control Module › Removal › 4 Door Model

4 Door Model

  1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the trim panel assembly - rear shelf. Ref. to EXTERIOR/INTERIOR TRIM>Rear Shelf Trim>REMOVAL .
  3. Remove the keyless entry control module.
    1. Disconnect the connector.
    2. Remove the bolt and then remove the keyless entry control module.
      G11246365Courtesy of SUBARU OF AMERICA, INC.
About FixVault