FixVault
Home › Subaru › 2018 › Crosstrek Base, Standard Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control/Fuel System › Crankshaft Position Sensor › Installation

Crankshaft Position Sensor: Installation

  1. Install the crankshaft position sensor to the cylinder block, and connect the connector to the crankshaft position sensor.

    Tightening torque: 

    6.4N.m (0.7kgf-m, 4.7ft-lb) 

  2. Install the air intake boot. Ref. to INTAKE (INDUCTION) (H4DO)>Air Intake Boot>INSTALLATION .
  3. Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
About FixVault