Stabilizer Bushing

Before installation, inspect the following items and replace any faulty part with a new one.
Check the bushing - stabilizer for abnormal cracks, fatigue or damage.
Install the bushing - stabilizer.
Install the clamp - stabilizer bushing.
Tightening torque:

30 N.m (3.1kgf-m, 22.1ft-lb)
Install the bracket COMPL - stabilizer.
CAUTION: To prevent damage to the vehicle body, place a cloth, etc. between the bracket COMPL - stabilizer and the vehicle body. After tightening nuts to specified torque, be sure to remove the cloth, etc.

Tightening torque:

35 N.m (3.6kgf-m, 25.8ft-lb)
Install the rear wheels and lower the vehicle.
Tightening torque:

120 N.m (12.2kgf-m, 88.5ft-lb)