FixVault
Home › Subaru › 2018 › Legacy 3.6R Limited › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control/Fuel System (H6DO) › Oil Flow Control Solenoid Valve › Removal › Exhaust Side

Exhaust Side

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Lift up the vehicle.
  3. Remove the under cover. Ref. to EXTERIOR/INTERIOR TRIM>Front Under Cover>REMOVAL .
  4. Disconnect the connector (A) from the exhaust oil flow control solenoid valve, and remove the exhaust oil flow control solenoid valve.
    • RH side
      G10263620Courtesy of SUBARU OF AMERICA, INC.
    • LH side
      G10263621Courtesy of SUBARU OF AMERICA, INC.
About FixVault